Proxim Edge MP-1035-CPE Device Management Manual page 76

Parameter(s)
SNMP
Version
Read Password
Read / Write Password
SNMP Trap Host Table
SNMP
Version
Security Level
Priv Protocol
Priv Password
Auth Protocol
Auth Password
SNMP Trap Host Table
Access Table Status
Reset to Factory
* BSU: Refers to a Base Station mode.
SU: Refers to both SU and CPE mode.
AP: Refers to an Access Point devices.
QB: Refers to Point-to-Point devices.
MP: Refers to Point-to-Mulitpoint devices.
All: Refers to an Access Point, point-to-point and point-to-mulitpoint devices.
Device Management Guide
SNMP (If SNMP v1-v2c is enabled)
MANAGEMENT -> Services -> SNMP
SNMP (If SNMP v3 is enabled)
MANAGEMENT -> Services -> SNMP
Management Access Control
MANAGEMENT -> Access Control
MANAGEMENT -> Reset to Factory
Web Page(s)
B Parameters Requiring Reboot
Applicable
Device Mode*
All
All
All
All
All
All
All
All
All
All
All
All
All
All
All
76