Upgrade License; Upgrade License Via Http; Upgrade License Via Tftp; Upgrade Certificate - Proxim Edge MP-1035-CPE Device Management Manual

•
Enter the name of the Binary, Text Based, or Config Profile file (including the file extension) in the File Name box
that you want to download onto the device.
3. If you are upgrading the device with Binary Configuration file, click Upgrade and then Reboot the device or click
Upgrade & Reboot.
4. If you are upgrading the device with Text Based Configuration file, click Upload and then click Apply.
5. If you are upgrading the device with Config profile file, click Upload and then Reboot the device or click Apply &
Reboot.
: It is recommended not to navigate away from the screen while the update is in progress.

5.2.3 Upgrade License

You can upgrade the license file on the device either through HTTP or TFTP. Refer
details.

5.2.3.1 Upgrade License via HTTP

To upgrade the license using HTTP, do the following:
1. Navigate to Management > File Management > Upgrade License > HTTP.
2. Click Choose File to locate the license upgrade (.bin) file.
3. Click Upgrade and then Reboot the device.

5.2.3.2 Upgrade License via TFTP

To upgrade the license file using TFTP Server, do the following:
1. Navigate to Management > File Management > Upgrade License > TFTP.
2. Based on the IP mode, configure either IPv4 or IPv6 address as TFTP Server address.
3. Enter the name of the file (including the file extension) in the File Name box that you want to load onto the device.
4. Click Upgrade and then Reboot the device.
:
• You can upgrade the license through CLI/Web Interface/SNMP.
• After license upgrade and device reboot, reconfigure the WORP input and output bandwidth limits as per the
newly licensed values.

5.2.4 Upgrade Certificate

Device comes with default SSL certificate. User can upload his own SSL certificate for secured access.
To upgrade the SSL certificate, follow the below steps:
1. Navigate to File Management > Upgrade Certificate.
2. Click Browse to locate the SSL certificate (.pem) file.
3. Click Upgrade/Upgrade & Reboot to update the SSL certificate on the device.
4. On Reboot, the device will be upgraded with the new SSL certificate.
Click Reset to make the device to come back to its default SSL certificate.
: SSL certificate will be in .pem file format.
Device Management Guide
Device Management
License Upgrade Procedure
for more
30