Using.the.setup.wizard - Proxim AP-4000MR-LR Quick Install Manual

5. Enter.the.HTTP.password.in.the.Password field. Leave the User.Name.
field blank. For.new.units,.the.default.HTTP.password.is.public.
If you are logging on for the first time the Setup Wizard will launch
automatically.
Note
Setup.Wizard.will.not.relaunch.on.subsequent.logins..To.force.the.Setup.
Wizard.to.launch.upon.login,.click.htManagement.>.Services.and.choose.
Enable.from.the.Setup.Wizard.drop.down.menu.
6. To configure the AP using the Setup Wizard, see Using.the.Setup.
Wizard,.below. To configure the AP without using the Setup Wizard,
click.Exit..Upon.clicking.Exit,.the.System.Status.screen.will.appear..See.
the "Advanced Configuration" chapter in the AP-4000MR-LR User Guide.for.
configuration instructions.
using the setup wizard
The Setup Wizard provides step-by-step instructions for how to configure
the Access Point's basic operating parameters, such as Network Name, IP
parameters,.system.parameters,.and.management.passwords.
1. Click.Setup.Wizard.to.begin..The.Setup.Wizard.supports.the.following.
navigation.options:
▪ Save.&.Next.Button:.Each.Setup.Wizard.screen.has.a.Save.&.Next.
button. Click this button to submit any changes you made to the unit's
parameters.and.continue.to.the.next.page..The.instructions.below.
describe.how.to.navigate.the.Setup.Wizard.using.the.Save.&.Next.
buttons.
▪ Navigation.Panel:.The.Setup.Wizard.provides.a.navigation.panel.
on.the.left-hand.side.of.the.screen..Click.the.link.that.corresponds.to.
the parameters you want to configure to be taken to that particular
All rights reserved Page 23