Using The Setup Wizard - Proxim AP-4900MR-LR Quick Install Manual

5. Enter the HTTP password in the Password field. Leave the User.Name
field blank. For new units, the default HTTP password is public.
If you are logging on for the first time the Setup Wizard will launch
automatically.
Note
Setup Wizard will not relaunch on subsequent logins. To force the Setup
Wizard to launch upon login, click htManagement > Services and choose
Enable from the Setup.Wizard drop down menu.
6. To configure the AP using the Setup Wizard, see Using.the.Setup.
Wizard,.below. To configure the AP without using the Setup Wizard,
click Exit. Upon clicking Exit, the System Status screen will appear. See
the "Advanced Configuration" chapter in the AP-4900MR-LR User Guide for
configuration instructions.

using the setup wizard

The Setup Wizard provides step-by-step instructions for how to configure
the Access Point's basic operating parameters, such as Network Name, IP
parameters, system parameters, and management passwords.
1. Click Setup Wizard to begin. The Setup Wizard supports the following
navigation options:
▪ Save.&.Next.Button: Each Setup Wizard screen has a Save & Next
button. Click this button to submit any changes you made to the unit's
parameters and continue to the next page. The instructions below
describe how to navigate the Setup Wizard using the Save & Next
buttons.
▪ Navigation.Panel: The Setup Wizard provides a navigation panel
on the left-hand side of the screen. Click the link that corresponds to
the parameters you want to configure to be taken to that particular
All rights reserved Page 23