Graphical User Interface Overview - Proxim Edge MP-1035-CPE Device Management Manual

Graphical User Interface
Overview

4.1 Graphical User Interface Overview

After logging in, the GUI title bar will display at the top of the browser screen, a navigation pane on the left, and a content
pane in the center. The default page shown in the content pane is the Setup Wizard / Summary.
•
Home: Click Home to return to the summary page which displays all the key performance parameters.
•
Commit: Click Commit to save all changes made to the configuration parameters. Perform a device reboot after a
successful Commit operation, if the reboot button blinks red.
•
Reboot: Click Reboot for changes made in the configuration parameters to take effect. It is mandatory to save the
changes before Reboot for changes to take effect.
•
ADVANCED: Click Advanced to navigate from Simplified to Detailed Graphical User Interface.
•
BASIC GUI: Click Basic GUI to navigate back to the simplified Graphical User Interface when logged as Admin.
•
When directly logged in as Advanced user, it is not possible to switch between GUIs.
•
TEMPORARY COMMIT: It allows users to temporarily apply the configuration on the device without storing it to
database (or Flash memory). On reboot the device will reset to the old configuration. To retain the configuration use
Commit. This feature is used to test configuration. In case of a link failure, the watchdog reboots the devices and
comes-up with old configuration.
The Graphical User Interface refreshes every 5 seconds to update the page with most recent information.
:
•
Recommended browser is Firefox latest version.
•
Recommended screen resolution is 1280 x 960 or higher.
This feature is available only in Advanced User login.
Device Management Guide
4
21