:
•
For Point to Point link, set one BS3 in "BSU-EPA" radio mode and one BS3 in "SU-EPB" radio mode
•
For Point to Multipoint, set one BS3 in "BSU" radio mode (license upgrade is needed to support up to 32
subscribers), and set every other BS3 and CPE in "SU" radio mode
•
Existing Edge v1 MP-10x5-BS3 supports all options: Point to Point / Point to Multipoint topologies and BSU / SU
modes. It keeps Number of SUs to 32
•
Existing Edge v1 MP-10x5-CPE only supports Point to Multipoint topology and SU mode.
•
Existing Edge v1 QB-10x5-EPR only supports Point to Point topology and End Point A / End Point B modes.
Wizard General tab controls device general configuration such as Device Name, Bridge or Routing mode and IP parameters.
Device Management Guide
Graphical User Interface Overview
24