Table of Contents
Advertisement
Chapter 1: Overview
eco-friendly
Button
34
You use the eco-friendly button on the management panel to turn the
LEDs on or off. You might turn off the LEDs when you are not using them
to monitor the switch, to conserve electricity. When the LEDs are off, the
overall power consumption of the chassis is reduced by approximately 2
watts.
The button controls all the port LEDs, except for the L/A LED for the NET
MGMT port. Additionally, the button does not control the LEDs on the
power supplies.
Note
The x950-52XSQ and x950-52XTQm switches do not have the
eco-friendly button; however, the eco-friendly mode can be turned
on or off with the ECOFRIENDLY LED or NO ECOFRIENDLY LED
command in the Command Line Interface.
Advertisement
Table of Contents
