Table of Contents
Advertisement
#1
#2
Length:101mm (3.8 in.)
#3
Length:202mm (8.0 in.)
#4
Length:277mm (10.9 in.)
#5
Length:303mm (11.9 in.)
(Factory default)
#6
Length:378mm (14.9 in.)
#7
Length:453mm (17.8 in.)
You adjust the lengths of the brackets by connecting them in different
combinations. There are seven possible configurations. Refer to
Figure 95. The default configuration is number 5. To adjust the extension
brackets, perform the following procedure:
1. Review Figure 95 to find the bracket length that most closely matches
the measurement taken in step 3 in the previous procedure.
Figure 95. Extension Bracket Configurations
x950 Series Installation Guide for Standalone Switches
151
Advertisement
Table of Contents
