Bender COMTRAXX CP305 Manual page 57

Displays, memory
Number of history memory entries
Interfaces
Ethernet
Connection
Data rate
DHCP
IP address (1:1 connection)
Netmask
Logs
Modbus TCP
Interface/protocol
Operating mode
BMS bus
Interface/protocol
Operating mode
Baud rate
Cable length
Shielded cable, one end of shield connected to PE
Galvanic separation
Connection
Terminating resistor
Device address
Digital inputs (1...12)
Number
Galvanic separation
Relay mode
COMTRAXX® CP305 - Control Panel
169.254.xx.yy (xx and yy are unique for each device)
nnn.nnn.nnn.nnn (255.255.255.0)*
TCP/IP, Modbus TCP, DHCP, SNTP
Recommended: CAT6/CAT7 min. AWG23
"BMS A", "BMS B" (see plug-in terminal)
120 (0.25 W), can be connected internally
Can be selected for each input: high-active or low-active
CP305_D00425_02_M_XXEN/07.2023
10/100 Mbit/s, autodetect
on/off (on)*
Ethernet/Modbus TCP
RS485/BMS internal
Master/slave (master)*
9.6 kBit/s
< 1200 m
Alternative: J-Y(St)Y min. 2 x 0.8
1...90 (1)*
In groups of four
IN 1...4 / GND 1-4
IN 5...8 / GND 5-8
IN 9...12 / GND 9-12
1000
RJ45
Slave
Yes
12
57