Display And Operation - Bender COMTRAXX CP305 Manual

9

Display and operation

Operation with latex, vinyl and nitrile gloves is possible without restricting functionality.
LED and display
Display in normal operation: There are no warnings or alarms pending.
• The LED lights up green.
• The display shows the programmed default display screen (start page).
You set parameters for the start page in the web operating application.
Display when warning or alarm messages are pending
• The LED lights up red or in the colour assigned to the alarm.
• Depending on the type of error, the display yellow ("Warning") or red ("Alarm"). The buzzer sounds at the
same time. If the cause of the message cannot be remedied immediately, you can mute the buzzer with the
"Acknowledge" button.
• Depending on the type of fault, the display has the colour assigned to the alarm. The buzzer sounds at the
same time (if configured). If the cause of the message cannot be remedied immediately, the buzzer tone can
be muted for the parameterised period of time with the "Acknowledge" button.
• The display shows details about the message. The message continues to be displayed visually until it is
corrected.
• If there are several simultaneous messages, they are displayed alternately. The LED has the colour of the
alarm with the highest priority.
Header
Date and time
• Date and time (only if no large clock is created on the start page)
NFC logo
•
The NFC logo is only visible when the NFC interface is activated.
Lock
•
not logged in
•
PIN deactivated or PIN entered and logged in
Menu
• See separate chapter
As long as you are not logged in to the device as an administrator, you can display the menu items but not
make any changes and/or modify settings. Details can be found in the chapter "Settings on the device".
Stopwatch active
Timer active
Device muted
COMTRAXX® CP305 - Control Panel
CP305_D00425_02_M_XXEN/07.2023 29