Device Management - Bender COMTRAXX CP305 Manual

Footer
• Import: Import configuration file of the alarm addresses (Excel file). *
• Export: Export configuration file of the alarm addresses (Excel file)
• Import ACTUAL state
• Save changes
• Discard changes
• Add entry
* Only configuration files that were previously exported from CP305 can be imported. Other Excel files (also
exports from other CPx) are not supported.
11.5.1.3 Test addresses
Test addresses
Display the bus addresses that are to carry out a test when the "TEST" button is pressed on the device display.
All test addresses are consolidated into one test group.
Only ISOMETERS

11.5.2 Device management

11.5.2.1 Start page
Configure the default display screen (start page)
The web user interface can be used to individually compile up to four entries on the start page.
Tools > Device Management > Start Page
You can create new entries using the "Add entry" button in the footer. The following options are available:
Type
Measured value
Text
Date and time
Empty line
Edit entries
®
can be tested.
Navigate to the source of the measured value via "Path". An explanatory
description can also be provided for the measured value displayed. The
currently measured value and description are displayed.
Enter any text you would like; this text will be displayed permanently.
If the date and time in the header are too small, this allows you to create a
large display. The display in the header then disappears.
Blank lines allow the start page to be designed so that not everything is
arranged in the upper section when there are less than four entries.
Use the arrow keys to change the order of the entries.
Edit entry
Delete entry
COMTRAXX® CP305 - Control Panel
Explanation
CP305_D00425_02_M_XXEN/07.2023 43