Alarm Overview (Footer); Start; System Overview; Device Tools - Bender COMTRAXX CP305 Manual

Web user interface: menu structure (via ETH socket)

11.1.5 Alarm overview (footer)

Overview of pending alarms
Click the alarm overview: List of pending alarms
Click the list: Details of the alarms in the content section
History memory of the device
From the alarm overview, you can jump directly to the stored history of the CP305.
11.2

Start

Display of device info (device version, current software, serial number, order number, BCOM name)
11.3

System overview

> System Overview > System
With direct access via the ETH socket, the "System" is the CP305 itself.
When you click the device "CP305", the following opens in the subnavigation:
• The device tools
• The menu of the device
• The BMS interface (as tile)
In the content section, there is an overview of the BMS interface, the set timers, the set service timer, the
configured relays and the assigned digital inputs.

11.3.1 Device tools

Device tools
Document device
Export backup
40 CP305_D00425_02_M_XXEN/07.2023
Here you can create documentation of the selected device as a pdf. By default the
documentation contains all parameters and measured values associated with the device
as well as device information such as serial number and software version. However,
only one of these pieces of information can be selected if desired (see checkbox). The
generated document reflects the current state of the device.
The following data is part of a backup:
- Menu parameters
- Individual texts relating to the device
- For devices of the COMTRAXX series, all relevant configuration files continue to be
integrated
For security reasons, passwords are not part of a backup.
In a user-defined backup, you can freely select which data from the device should be
saved in it.
You switch to the next step by pressing the "Next" button in the footer.