Display Cp305: Menu Structure; Measured Values; Bus Overview; History - Bender COMTRAXX CP305 Manual

10

Display CP305: Menu structure

Normal state: The header and the LED are green when there is no alarm.
In the event of an alarm, the header and LED take on the colour of the highest alarm level present.
10.1

Measured values

• Digital inputs 1...12 and relays 1...2 show the measured value and current status.
• Display of date for the next service inspection
10.2

Bus overview

The bus overview shows the BMS bus addresses used with the connected devices. Because of the BMS bus
cycle, it may take some time until all bus addresses are updated.
In the web browser, this information is available in the system overview.
Touching the device in the bus overview takes you to its detail page. Depending on the device, the individual
channels, their alarm status and the current measured values are listed here.
The BMS channels 1...12 are always displayed, even if they are not occupied.
10.3

History

The warning and alarms are automatically stored in the history memory with dates and timestamps. 1000 text
messages can be stored.
Each subsequent message overwrites the oldest message (message 1001 overwrites message 1 and so on).
Each entry in the list opens a pop-up with further information when touched.
The history can also be found in the web user interface.
Header > System > Menu > History
COMTRAXX® CP305 - Control Panel
CP305_D00425_02_M_XXEN/07.2023 31