History; Clock; Display; Security - Bender COMTRAXX CP305 Manual

Device
Configure the displayed device name. Saved changes are immediately applied to the CP305.
The individual device name is appended to the device type in the history.
Example: Device name "Room 4.2.3 Window" is listed in the history as "CP305-IO – Room 4.2.3 Window".
You do not need to include the device type here.
Digital inputs
Provide the 12 digital inputs DI1...12 (measuring points) with description text
The designations of the digital inputs can also be assigned in the settings of the digital inputs.
Menu > Settings > Digital inputs 1...12
Both places are automatically synchronised with each other.
12.5

History

Delete the saved history in the device and in the web user interface. This step cannot be undone.
If you want to save the history, export the history before deleting it under Menu > History > Export in the
web user interface.
12.6

Clock

Setting option for
• Time, date, time zone, daylight saving time
• Synchronisation with time server (SNTP) (auto DHCP, on, off)
12.7

Display

General
• Language
• Alignment
• Cleaning mode active
Setting option: deactivated or locked for 5...20 s
Alarm messages
• Set the time until the page is changed for several pending alarms.
Setting range: 3/5/10 seconds
Standby mode
• Standby mode (off, auto dim, display time)
• Timeout (display) after 1...10 minutes
• Brightness "off", 10...90%
In the event of an alarm, the display is always at 100% brightness. Only after the alarm has been
eliminated does the CP305 go into standard operation with the configured standby mode.
12.8

Security

The PIN for logging in to the device and the password for logging in to the web user interface are independent
of each other.
COMTRAXX® CP305 - Control Panel
CP305_D00425_02_M_XXEN/07.2023 47