Tools; Monitoring - Bender COMTRAXX CP305 Manual

Remote alarm indicator for medical locations and other areas

Hide thumbs Also See for COMTRAXX CP305:

Table of Contents

Web user interface: menu structure (via ETH socket)

11.5

Tools

11.5.1.1 Device failure monitoring

All devices whose failure is monitored are summarised here in a list.

The CP305 can generate messages when a device on the BMS bus fails. To do this, the device must be included

in the list of devices to be monitored.

Tools > Monitoring > Device Failure Monitoring

You can add new entries using the "Add entry" button in the footer.

• Add existing device

A device already known to the system is to be added to the list. Navigate through the path indicator to the

device to be monitored.

• Add new device

A device previously unknown to the system is to be added to the list. This requires that you enter the BMS

address of the device to be monitored.

Import actual state

All active devices on the BMS bus are displayed as a list.

11.5.1.2 Alarm addresses

Alarm groups tab

The alarm groups are created here first. Alarm addresses can then be assigned to them.

Alarm addresses tab

Alarms are defined here and configured as they are to be displayed. Each measuring channel can be selected

as an alarm address and individually configured, such as the colour of the alarm pop-up, the help texts, the

sounds, and so on. Each alarm can also be assigned to a previously created alarm group.

Each alarm address can display any combination of

• Collective alarm

• Device failure

• Measured value

Edit entries

CP305_D00425_02_M_XXEN/07.2023

Show a preview of an alarm message

Edit entry

Delete entry

Table of Contents