Factory Settings For Communication - Bender COMTRAXX CP305 Manual

Remote alarm indicator for medical locations and other areas

Hide thumbs Also See for COMTRAXX CP305:

Table of Contents

Factory settings for communication

The settings can be changed on the device or via the web user interface.

IP address

IP address for 1:1 ETH connection

Netmask

Standard gateway

DNS

DHCP

BMS address

BMS protocol

CP305_D00425_02_M_XXEN/07.2023

Parameter

Address range (169.254.xx.yy)

Note: xx and yy are derived from the MAC address during

putting into service and are therefore unique for each

CP305. This address cannot be changed.

255.255.255.0

192.168.0.1

BMS i

Table of Contents