Menu; Bms; Alarm Overview (Footer) - Bender COMTRAXX CP305 Manual

Remote alarm indicator for medical locations and other areas

Hide thumbs Also See for COMTRAXX CP305:

Table of Contents

Import backup

11.3.2 Menu

Measured values

History

Settings

Info

The content section shows the connected BMS bus of the CP305. Clicking a device will cause the current

measured values or alarms to be displayed.

11.4

Overview of pending alarms

Click the alarm overview: List of pending alarms

Click the list: Details of the alarms in the content section

History memory of the device

From the alarm overview, you can jump directly to the stored history of the CP305.

You can import an existing backup here. All information in the backup is compared with

the current information on the device. Then you can select the ones you want to import.

Important: Please ensure in advance that the backup file is intended for the

device!

You switch to the next step by pressing the "Next" button in the footer.

Digital inputs IN1...12

Relay 1...2

Service inspection

Up to 1000 entries can be stored. After that, the oldest data is overwritten (FIFO).

The history entries can also be viewed on the CP305.

See chapter Settings

Device name, item number, serial no., firmware, bootloader, BMS address, IP address,

MAC address

This information can also be viewed on the CP305.

COMTRAXX® CP305 - Control Panel

CP305_D00425_02_M_XXEN/07.2023

Table of Contents