Factory Setting - Bender COMTRAXX CP305 Manual

COMTRAXX® CP305 - Control Panel
Prewarning
(deactivated, 1 week ... 3 months) – message before the service interval expires so that plans can be made for
the next inspection.
Next service
(display only)
Service inspection
Next service
Only displayed when a service interval is set.
Last service
Date display on which date the last service check was carried out.
Service inspection
The service inspection is started here.
For the service inspection, it is necessary to first create at least one alarm address.

12.11 Factory setting

Restart device: Perform a restart without having to disconnect the CP305 from the power supply.
Factory settings with interface: The device is reset to the factory settings, and individual interface settings
are discarded.
Factory settings without interface: The device is reset to the factory settings, and individual interface
settings are retained.
CP305_D00425_02_M_XXEN/07.2023 49