Comtraxx® User Interface Of The Cp9Xx; Factory Settings Communication Addresses - Bender COMTRAXX CP9 Series Manual

3.5 COMTRAXX® user interface of the CP9xx
The device has a web user interface for setting and operation. How to start the web interface:
– Open an Internet browser from any network device.
– Enter the address of the CP9xx device into the address line of the browser.
It is possible to connect the CP9xx directly to a computer/laptop. In this case, the CP9xx can be controlled with
a second fixed IP address.
– Open the browser on the connected device
– Enter the following IP address: 169.254.0.1
The start screen of the COMTRAXX® user interface appears in the browser window.
HOM E
BUS O VER VIE W
ALARM S
TOOLS
System OK
COMTRAXX® manual
Further information about functionality and configuration of the CP9xx can be found in
the COMTRAXX® manual.

3.5.1 Factory settings communication addresses

CP9xx devices are delivered with the following factory settings:
Parameter
IP address
Connection via pre-defined IP address
(e.g. for direct 1:1 ETH connection)
Net mask
Standard gateway
DNS
DHCP
Some of the settings can be changed during commissioning via the display or the web user interface.
20
CP900
COMTRAXX®
Device info
Comtraxx CP900 V3.0
1207990020-Bxxxxxxxx
Text
Abb. 3.5: Start window CP907 in the COMTRAXX® user interface
LOGIN to the device
LANGUAGE selection
SHOW MENU/HIDE MENU
SYSTEMS without faults
ALARMS with number of faults
Factory setting
169.254.0.1
255.255.0.0
192.168.0.1
-
off
Installation, connection and commissioning
Text ...
EN
18.07.2017 13:30
EN
System OK
System OK Alarms 2
Parameter
t Timeout for DCHP address assignment
off
BMS address
BMS protocol
BCOM system name
Subsystem address
BCOM device address
CP9xx_D00349_07_M_XXEN/01.2020
Factory setting
30 s
1
BMS i
SYSTEM
1
1