Table of Contents
Advertisement
Section 8
Normal Operation
Dispensing Water
Automatic Dispensing
8-2
Nanopure Life Science (UV/UF)
Use the dispense knob for manual dispensing or, use the "Dispense" switch
for volumetric or timed dispensing. See "User Settings."
This feature is accessible only from the normal recirculating mode when
the display is showing purity. It is factory set to "OFF".
1. Place a container under the dispenser.
2. Press DISPENSE. Water will start dispensing immediately! Display will
read, "xx.MΩ-cm xx Liters Remaining" or "xx.MΩ-cm xx Seconds
Remaining," or "AUTO DISPENSE <OFF>" depending on which
dispensing method was last chosen in the auto dispense menu.
Note Press any switch except ENTER to stop dispensing. Display will read,
"Auto Dispense Interrupted by User."
Note If the Nanopure "Auto Dispense" feature is set to (TIME), a
connected Accudispense accessory (if one exists) will not automatically
dispense.
s
s
Thermo Scientific
Advertisement
Table of Contents
