Optional Accessory
Ordering Information
Ordering Procedures
Thermo Scientific
Description
N.I.S.T. Calibration Module
Low-Pressure Switch
Float Switch
Remote Dispenser (Manual)
Accudispense Volumetric Remote Dispenser
Serial Cable for Communication with Computer
Printer (120-240 VAC system)
Printer Replacement Paper Roll
Dispense Overflow Cutoff Float
Bench Top Display Holder
Refer to the Specification Plate for the complete model number, serial
number, and series number when requesting service, replacement parts or
in any correspondence concerning this unit.
All parts listed herein may be ordered from the Thermo Scientific dealer
from whom you purchased this unit or can be obtained promptly from the
factory. When service or replacement parts are needed, check first with
your dealer. If the dealer cannot process your request, then contact our
Technical Services Department.
Prior to returning any materials, contact our Technical Service
Department for a "Return Materials Authorization" number (RMA).
Material returned without an RMA number will be refused.
Section 14
Replacement Parts
Catalog No.
E896X5
D2706
D8964
D11981
D13661
WHX18
AY1137X1
AY669X4
AY1367X1
AY1367X2
Nanopure Life Science (UV/UF)
14-3