Automatic Image Capture; Cancel Auto Capture; Export Image; Export From Capture Screen - Thermo Scientific invitrogen E-Gel G8121ST User Manual

Automatic image capture

The E-Gel
capture and save 2–5 images of the gel at evenly spaced intervals.
1. Press Settings /
2. Select Auto capture.
3. Select one of following capture methods:
a.
b.
4. Select the number of images to be captured.
5. Select the time at which image capture will start (5, 10, 15, or 20 minutes prior to the end of the
protocol).
6. Press Start to begin the automatic capture session.
Cancel auto
1. Press Home.
capture
2. Select Yes.

Export image

Images can be exported from the capture screen or the image gallery. The number of images
captured in an active capture session will appear on the Export button on the capture screen.
Images previously stored on internal memory are accessed from the image gallery.
Export from
capture 1. Insert a USB storage device into the USB port at the
front of the E-Gel
screen
2. Press Export from the capture screen.
3. Review the images in the active session gallery, and
select files for export.
4. (Optional) Select Edit info to change the file name, file
type (Jpeg, TIFF, or VIT format), or add comments.
5. Press Export to export active session images to the
USB storage device.
E-Gel Power Snap Electrophoresis System User Guide
™
Power Snap Camera can automatically capture images as the gel runs. The camera can
™
.
Smart exposure: captures each image at the optimal exposure level.
Multiple exposures: captures each image at three different exposure levels.
Power Snap Camera.
™
23