Adding Static Arp Entries Manually; Configuring Gratuitous Arp - TP-Link T1600G-52TS User Manual

Configuring ARP
Type

2.1.2 Adding Static ARP Entries Manually

You can add desired static ARP entries by mannually specifying the IP addresses and MAC
addresses.
Choose the menu L3 FEATURES > ARP > Static ARP and click
following page.
Figure 2-2 Adding Static ARP Entries
Enter the IP address and MAC address, then click Create.
IP address
MAC address

2.1.3 Configuring Gratuitous ARP

Choose the menu L3 FEATURES > ARP > Gratuitous ARP to load the following page.
Displays the type of an ARP entry.
Static: The entry is added manually and will always remain the same.
Dynamic: The entry that will be deleted after the aging time leased. The default aging
time value is 600 seconds. If you want to change the aging time, you can use the CLI
to configure it.
Specify the IP address of the static ARP entry.
Specify the MAC address.of the static ARP entry.
ARP Configurations
to load the
User Guide 504