Port Config - TP-Link T1600G-52TS User Manual

Configuring LLDP
TTL Multiplier:
Tx Delay:
Initialization Delay:
Trap Notification Interval:
Fast-packet Count:
LLDP-MED Fast Start Repeat Count:
Switch(config)#end
Switch#copy running-config startup-config

3.2.2 Port Config

Select the desired port, enable LLDP-MED and select the TLVs (Type/Length/Value)
included in the outgoing LLDP packets according to your needs.
Step 1
Step 2
Step 3
Step 4
Step 5
configure
Enter global configuration mode.
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list ]
Enter interface configuration mode.
lldp med-status
(Optional) Enable the LLDP-MED on the port. It is disabled by default.
lldp med-tlv-select { [ inventory-management] [location] [network-policy]
[power-management] [all ] }
(Optional) Configure the LLDP-MED TLVs included in the outgoing LLDP packets. By default,
the outgoing LLDP packets include all TLVs.
If LLDP-MED Location TLV is selected, configure the parameters as follows:
lldp med-location {emergency-number identifier | civic-address [language language
| province-state province-state | lci-county-name county | lci-city city | street street
| house-number house-number | name name | postal-zipcode postal-zipcode | room-
number room-number | post-office-box post-office-box | additional additional | country-
code country-code | what { dhcp-server | endpoint | switch } ] }
Configure the LLDP-MED Location TLV included in the outgoing LLDP packets. Used to
assign the location identifier information to the Endpoint devices.
identifier: Configure the emergency number to call CAMA or PSAP. The number should
contain 10-25 characters.
language, province-state, county.etc:
format.
show lldp interface { fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port }
Display LLDP configuration of the corresponding port.
4
2 seconds
2 seconds
5 seconds
3
4
Configure the address in the IETF defined address
LLDP-MED Configurations
User Guide 370