Configuring Manual Binding - TP-Link T1600G-52TS User Manual

Configuring DHCP Service
Switch(dhcp-config)#show ip dhcp server pool
Pool Name: pool1
Network Address: 192.168.1.0
Subenet Mask: 255.255.255.0
Lease Time: 180
Default Gateway: 192.168.1.1
DNS Server: 192.168.1.4
Netbios Server:
Netbios Node Type:
Next Server Address: 192.168.1.30
Domain Name:
Bootfile Name:
Switch(dhcp-config)#end
Switch#copy running-config startup-config

2.2.3 Configuring Manual Binding

Some hosts, WWW server for example, requires a static IP address. To satisfy this
requirement, you can manually bind the MAC address or client ID of the host to an IP
address, and the DHCP server will reserve the bound IP address to this host at all times.
Follow these steps to configure Manual Binding:
Step 1
Step 2
192.168.1.19
b-node
com
bootfile
configure
Enter Global Configuration Mode.
ip dhcp server pool name
Create a DHCP server pool and enter DHCP Configuration Mode.
DHCP Server Configuration
User Guide 446