Using The Cli; Configuring Igmp Snooping Globally - TP-Link T1600G-52TS User Manual

Configuring Layer 2 Multicast
Choose the menu L2 FEATURES > Multicast > IGMP Snooping > Static Group Config and
click
Figure 2-4 Configure Hosts to Statically Join a Group
Follow these steps to configure hosts to statically join a group:
1) Specify the multicast IP address, VLAN ID. Select the ports to be the static member
ports of the multicast group.
Multicast IP
VLAN ID
Member Ports
2) Click Create.
2.2

Using the CLI

2.2.1 Configuring IGMP Snooping Globally

Follow these steps to configure IGMP Snooping globally:
Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping
Enable IGMP Snooping Globally.
to load the following page.
Specify the address of the multicast group that the hosts need to join.
Specify the VLAN that the hosts are in.
Select the ports that the hosts are connected to. These ports will become the
static member ports of the multicast group and will never age.
IGMP Snooping Configuration
User Guide 218