Configuring Voice Vlan Globally - TP-Link T1600G-52TS User Manual

Configuring QoS
Figure 4-1 Configuring OUI Addresses
Follow these steps to configure the OUI addresses:
1) Click
Figure 4-2 Creating an OUI Entry
2) Specify the OUI and the Description.
OUI
Description
3) Click Create.

4.1.1 Configuring Voice VLAN Globally

Choose the menu QoS > Voice VLAN > Global Config to load the following page.
to load the following page.
Enter the OUI address of your voice devices. The OUI address is used by the
switch to determine whether a packet is a voice packet. An OUI address is the
first 24 bits of a MAC address, and is assigned as a unique identifier by IEEE
(Institute of Electrical and Electronics Engineers) to a device vendor. If the source
MAC address of a packet matches the OUI addresses in the OUI list, the switch
identifies the packet as a voice packet and prioritizes it in transmission.
Give an OUI address description for identification.
Voice VLAN Configuration
User Guide 546