Using The Cli; Enabling Dhcp Server - TP-Link T1600G-52TS User Manual

Configuring DHCP Service
Choose the menu L3 FEATURES > DHCP Service >DHCP Server > Manual Binding and
click
Figure 2-4 Manual Binding
Select a pool name and enter the IP address to be bound. Select a binding mode and finish
the configuration accordingly. Click Create.
Pool Name
IP Address
Binding Mode
Client ID
Hardware
Address
Hardware Type
2.2

Using the CLI

2.2.1 Enabling DHCP Server

Follow these steps to enable DHCP Server and to configure ping packets and ping timeout.
Step 1
Step 2
to load the following page.
Select a DHCP server pool from the drop-down list.
Enter the IP address to be bound to the client.
Select the binding mode:
Client ID: Bind the IP address to the client ID of the client.
Client ID in ASCII: Bind the IP address to the client ID in ASCII format.
Hardware Address: Bind the IP address to the MAC address of the client.
If you select Client ID as the binding mode, enter the client ID in this field.
If you select Hardware Address as the binding mode, enter the MAC address in this
field.
If you select Hardware Address as the binding mode, select a hardware type. The
hardware type includes Ethernet and IEEE802.
configure
Enter Global Configuration Mode.
service dhcp server
Enable DHCP Server.
DHCP Server Configuration
User Guide 440