Configuring Layer 3 Interfaces
1) Go to L2 FEATURES > VLAN > 802.1Q VLAN to create VLAN 2. Add port 1/0/2 to VLAN
2 with its egress rule as Untagged.
Table 3-2
2) Go to L3 FEATURES > Interface to enable IPv4 routing (enabled by default), then click
and manually assign an IP address 192.168.2.1 to the interface.
Table 3-3
3) Click
3.3.1 Using the CLI
1) Create VLAN 2 and add port 1/0/2 to VLAN 2 with its egress rule as Untagged.
Switch#configure
Create VLAN 2
to create VLAN interface 2. Here we choose the IP address mode as Static
Create VLAN Interface 2
to save the settings.
Configuration Example
User Guide
413