Command Line Interface Access; Console Login (Only For Switch With Console Port) - TP-Link T1600G-52TS User Manual

Accessing the Switch
3

Command Line Interface Access

Users can access the switch's command line interface through the console (only for switch
with console port), Telnet or SSH connection, and manage the switch with the command
lines.
Console connection requires the host PC connecting to the switch's console port directly,
while Telnet and SSH connection support both local and remote access.
The following table shows the typical applications used in the CLI access.
Table 3-1 Method list
Method
Console
Telnet
SSH
3.1

Console Login (only for switch with console port)

Follow these steps to log in to the switch via the Console port:
1) Connect the PC or terminal to the Console port on the switch with the serial cable.
2) Start the terminal emulation program (such as the Hyper Terminal) on the PC and
configure the terminal emulation program as follows:
■ Baud Rate: 38400bps
■ Data Bits: 8
■ Parity: None
■ Stop Bits: 1
■ Flow Control: None
3) Type the User name and Password in the Hyper Terminal window. The default value for
both of them is admin. Press Enter in the main window and Switch> will appear, which
Using Port
Console port (connected
directly)
RJ-45 port
RJ-45 port
Command Line Interface Access
Typical Applications
Hyper Terminal
CMD
Putty
User Guide 10