Multicast Filtering Configuration; Using The Gui; Creating The Multicast Profile - TP-Link T1600G-52TS User Manual

Configuring Layer 2 Multicast
5

Multicast Filtering Configuration

To complete multicast filtering configuration, follow these steps:
1) Create the IGMP profile or MLD profile.
2) Configure multicast groups a port can join and the overflow action.
5.1

Using the GUI

5.1.1 Creating the Multicast Profile

You can create multicast profiles for both IPv4 and IPv6 network. With multicast profile,
the switch can define a blacklist or whitelist of multicast groups so as to filter multicast
sources.
The process for creating multicast profiles for IPv4 and IPv6 are similar. The following
introductions take creating an IPv4 profile as an example.
Choose the menu L2 FEATURES > Multicast > Multicast Filtering > IPv4 Profile, and click
to load the following page.
Note:
To create a multicast profile for IPv6, choose the menu L2 FEATURES > Multicast > Multicast
Filtering > IPv6 Profile.
Multicast Filtering Configuration
User Guide 252