Example For Configuring Multicast Filtering; Network Requirements; Configuration Scheme - TP-Link T1600G-52TS User Manual

Jetstream smart switches

Hide thumbs Also See for T1600G-52TS:

Table of Contents

Configuring Layer 2 Multicast

5) Save the settings.

Switch(config)#end

Switch#copy running-config startup-config

Verify the Configurations

Show global settings of IGMP Snooping:

Switch(config)#show ip igmp snooping

IGMP Snooping

IGMP Version

Unknown Multicast

Enable Port: Gi1/0/1-28

Enable VLAN:10

Show settings of IGMP Snooping on port 1/0/2:

Switch(config)#show ip igmp snooping interface gigabitEthernet 1/0/2 basic-config

Example for Configuring Multicast Filtering

Host B, Host C and Host D are in the same subnet. Host C and Host D only receive multicast

data sent to 225.0.0.1, while Host B receives all multicast data except the one sent from

With the functions for managing multicast groups, whitelist and blacklist mechanism (profile

binding), the switch can only allow specific member ports to join specific multicast groups

or disallow specific member ports to join specific multicast groups. You can achieve this

filtering function by creating a profile and binding it to the corresponding member port.

IGMP-Snooping

-------------------

Configuration Examples

Show Quick Links

Table of Contents