Configuring Static Lag Or Lacp - TP-Link T1600G-52TS User Manual

Configuring LAG
as "SRC MAC" to allow Switch A to determine the forwarding port based on the source
MAC addresses of the received packets.
Figure 2-2 Hash Algorithm Configuration

2.1.2 Configuring Static LAG or LACP

For one port, you can choose only one LAG mode: Static LAG or LACP. And make sure both
ends of a link use the same LAG mode.
■ Configuring Static LAG
Choose the menu L2 FEATURES > Switching > LAG > Static LAG to load the following
page.
Figure 2-3 Static LAG
Follow these steps to configure the static LAG:
1) Select an LAG for configuration.
Group ID
Description
2) Select the member ports for the LAG. It is multi-optional.
Switch A
Hosts
Select an LAG for static LAG configuration.
Displays the LAG mode.
LAG Configuration
Switch B
Server
User Guide 108