Using The Cli - TP-Link T1600G-52TS User Manual

Managing Physical Interfaces
Figure 3-2 Port Isolation
Follow these steps to configure Port Isolation:
1) In the Port section, select one or multiple ports to be isolated.
2) In the Forwarding Port List section, select the forwarding ports or LAGs which the
isolated ports can only communicate with. It is multi-optional.
3) Click Apply.
3.2

Using the CLI

Follow these steps to configure Port Isolation:
Step 1
Step 2
configure
Enter global configuration mode.
interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | ten-gigabitEthernet port | ten-range gigabitEthernet port-list |
port-channel port-channel | range port-channel port-channel-list |}
Specify the port to be isolated and enter interface configuration mode.
Port Isolation Configurations
User Guide 91