Using The Cli; Configuring Parameters On Ports In Cist - TP-Link T1600G-52TS User Manual

Configuring Spanning Tree
Regional Root Bridge
Internal Path Cost
Designated Bridge
Root Port
Latest TC Time
TC Count
The MSTP Instance Summary section shows the information in MST instances:
Instance ID
Instance Status
Local Bridge
Regional Root Bridge
Internal Path Cost
Designated Bridge
Root Port
Latest TC Time
TC Count
3.2

Using the CLI

3.2.1 Configuring Parameters on Ports in CIST

Follow these steps to configure the parameters of the port in CIST:
Step 1 configure
Enter global configuration mode.
interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
Step 2
gigabitEthernet port-list | ten-gigabitEthernet port | range ten-gigabitEthernet port-list |
port-channel port-channel-id | range port-channel port-channel-list }
Enter interface configuration mode.
Displays the bridge ID of the root bridge in IST.
Displays the internal path cost. It is the root path cost from the current switch to
the root bridge in IST.
Displays the bridge ID of the designated bridge in CIST.
Displays the root port of in CIST.
Displays the latest time when the topology is changed.
Displays how many times the topology has changed.
Select the desired instance.
Displays the status of the desired instance.
Displays the bridge ID of the local switch. The local bridge is the current switch.
Displays the bridge ID of the root bridge in the desired instance.
Displays the internal path cost. It is the root path cost from the current switch to
the regional root bridge.
Displays the bridge ID of the designated bridge in the desired instance.
Displays the root port of the desired instance.
Displays the latest time when the topology is changed.
Displays how many times the topology has changed.
MSTP Configurations
User Guide 326