6.6.4
Requirement
Connecting the wastewater line to the
discharge funnel
Connecting the wastewater line to the discharge funnel
a Wastewater discharge from the
unit
b Wastewater line
c Funnel wastewater trap
NOTICE
Connect only the discharge funnel if a wastewater trap is installed in the
wastewater system.
Polypropylene (PP) pipes, elbows, discharge funnel and waste trap
▪ Heat-resistant to 95 °C (203°F)
▪ Nominal diameter 50 mm (2in)
▪ Maximum pipe length 1.0 m (39in)
a) Connect the discharge funnel with waste trap to the wastewater system.
b) Connect the wastewater line to the unit and extend it to the discharge
funnel.
c) Secure the wastewater line with clamps.
d) Place the wastewater line discharge 2 cm (1in) above the discharge
funnel.
Connecting the unit
Making the wastewater connection
d Wastewater system
e Wastewater system trap
f Discharge funnel
6
37