Making The Wastewater Connection; Connecting The Waste Water Line To A Permanent Connection - Henny Penny FlexFusion Platinum Installation Manual

6.6 Making the wastewater connection

6.6.1 Connecting the waste water line to a permanent connection

INFORMATION
5. Connect the connection line for softened drinking water to the T-
piece using a seal.
6. Open the drinking water tap and check the threaded fittings for
leakage tightness.
7. Fill out the Start-up operation report.
Image: Connecting softened drinking water to both connections
a Backflow preventer
b Softened drinking water
c Connection line
Waste water installation tasks
Waste water installation tasks on waste water systems and the unit
may only be carried out by a specialized company that is responsible
for waste water systems. The applicable regional regulations,
standards and guidelines must be observed, as well as the
connection conditions imposed by the operator of the waste water
company responsible.
Technical qualifications for waste water installation tasks
Waste water installation tasks on waste water lines and the unit may
be carried out only by a waste water specialist provided by the
specialist company contracted.
If a siphon is installed in the waste water system, a vacuum breaker must be
installed in the waste water line.
Installation instructions
a
Connecting the unit
b
c
a
f
d
e
d T-piece
e Seal
f Dirt filter
d e
f
g
h
b
c
37