Table of Contents
Advertisement
Smart Combi
™
Classic Combi
™
5.2.1 Waste water connection for units with WaveClean
Global Foodservice Solutions
Figure 10: Parts of the T-piece
1
Sealing ring
2
Threaded connector
3
Metal ring
1. Check that both sealing rings (1) are lying flat in the threaded
connectors (2).
2. Screw the threaded connectors (2) evenly onto the hard and soft
water connections and tighten securely. Avoid cross-threading.
CAUTION
Damage to the unit caused by water
→ Check that the metal rings are positioned correctly.
3. Check that both metals rings (3) are lying on the respective plastic
sprocket in the threaded connector (2).
If not, open the threaded connector (2) and repeat the process.
5.2 Waste water connection
The unit is equipped with a siphon (odour trap) with an overflow and
can be connected to the waste water system without taking additional
action. Customer-supplied siphons should be avoided.
Planning and installation instructions
Water
1
2
3
35
Advertisement
Table of Contents
