6.5 Making the water connection
CAUTION
NOTICE
INFORMATION
6.5.1 Connecting the drinking water connection line
INFORMATION
Prerequisite Water pressure complies with specifications (see "Unit and
Drinking water installation tasks
Drinking water installation tasks on drinking water lines and the unit
may only be performed by a specialist company, which is approved
by the drinking water utility company in the particular region. The
applicable regional regulations, standards and guidelines must be
observed, as well as the connection conditions imposed by the
drinking water utility company responsible.
Technical qualifications for drinking water installation tasks
Drinking water installation tasks on drinking water lines and the unit
may be carried out only by a water specialist provided by the
specialist company contracted.
The unit has a connection for permanent installation to the drinking
water supply.
The unit is equipped with a permanent connection for:
•
Softened drinking water for steam generation
•
Drinking water for cooling, rinsing and cleaning
Hygiene risk from contaminated drinking water
• The connection to the drinking water supply must be equipped with a back-
flow preventer.
Risk of property damage from the wrong water quality
• Ensure that the water quality complies with the unit and connection data.
Always connect both water connections to the unit.
Each unit must be connected individually.
Do not join the connection lines.
connection data")
Backflow preventer installed
Pressure-resistant connection lines suitable for tap water are
available
1. Connect the connection lines to the drinking water taps using
seals.
Installation instructions
Connecting the unit
35