Table of Contents
Advertisement
Connecting the unit
6
Making the water connection
Basic setting
Altitude
Audio setting
Temperature
display
80% power
Power optimizing
system
connected?
6.5.1
6.5.2
32
No.
Standard
value
1
0
2
20
°C
3
4
0
5
0
6.5
Making the water connection
Information regarding the water connection
Installation work involving drinking water must be performed by an
authorised plumbing contractor. Observe applicable regional regulations with
regard to drinking water installations and connection data.Equipment and
connection data [➙ 12]
Connecting hard and soft water
The unit is equipped with a connection for:
▪ Soft water for generating steam
▪ Hard water for cooling, rinsing and WaveClean
Setting range Explanation
0 - 3
Request the altitude above sea level from the
closest weather station. If the altitude is
unknown, enter 0 – 500 m.
▪ 0 = 0 - 500 m (0 - .31 mi)
▪ 1 = 501 – 1000 m (.31 - .62 mi)
▪ 2 = 1001 – 1500 m (.62 - .93 mi)
▪ 3 = > 1500 m (.93 mi)
0 – 180 s
Duration of audible signal
0 = Signal off
°C/°F
The temperature can be displayed in °C or °F
0 = No
Yes = Power limited to 80 % (for special
1 = Yes
applications)
0 = No
If the power optimizing system is connected,
1 = Yes
"Yes" must be selected for the unit to heat.
Advertisement
Table of Contents
