Configuring
9.11 Configuring the clock system
SINAMICS Integrated clock system
Proceed as follows to set the clock system of the SINAMICS Integrated:
1. Switch to the network view.
2. Click on PROFIdrive Integrated in the network view.
3. Make the settings for the SINAMICS Integrated under "Constant bus cycle time".
The SINAMICS Integrated is always isochronous (option is always selected).
Figure 9-41
SINAMICS Integrated (PROFIdrive Integrated) clock system
212
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD