Siemens SIMATIC S7-1500 System Manual page 307

Labeling of the SIMATIC Memory Card
①
②
③
④
⑤
Figure 14-1
Folders and files on the SIMATIC Memory Card
The SIMATIC Memory Card can contain the following folders and files:
Table 14- 1 Folder structure
Folder
FWUPDATE.S7S
SIMATIC.S7S
SINAMICS.S7S
SIMATIC.HMI
DataLogs
1)
Recipes
1)
UserFiles
1)
Backups
DUMP.S7S
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
Article number
Serial number
Production version
Memory size
Slider for setting write protection:
• Slider up: not write-protected
• Slider down: write-protected
Labeling of the SIMATIC Memory Card
Description
Firmware update files for CPU and SINAMICS Integrated
Project data of the CPU; user program, i.e. all blocks (OBs, FCs, FBs, DBs) and system blocks
If SINAMICS Integrated is configured, project data of the SINAMICS Integrated
The folder structure under the SINAMICS.S7S folder is based on the structure of a SINAMICS S120
memory card.
HMI-related data
DataLog files
Recipe files
You need to manually create the folder "UserFiles" for user data on the memory card. Only files in
this folder (*.pdf, *.txt, *.csv, etc.) are also loaded to the TIA Portal project with the "Upload de-
vice as new station" function.
Files for backup and restore
Service data files
SIMATIC memory card
14.1 SIMATIC memory card – Overview
305