Siemens SIMATIC S7-1500 System Manual page 163

Procedure
1. Select the Device configuration entry in the project tree under the CPU. The device view
opens.
2. In the device view, click the DI/DQ 8x24VDC [X142] interface. You can now edit the
configurable properties under Properties in the Inspector window.
Under Channel parameters, you can find an overview of all channels and your selected
settings.
Figure 9-10 Channel parameters
Via links (arrow symbols) you will get to the parameter assignment of the respective channel
or to the interconnected technology object.
Note
Multi-links
If you have linked a channel to several technology objects, you can select the link of the
required technology object via the drop-down list.
You update the drop-down lists via the Refresh button next to "Interconnections". Updating
may be required, for example, if changes were made to technology objects elsewhere in the
project while the channel configuration was open.
SIMATIC Drive Controller
System Manual, 11/2023, A5E46600094-AD
9.9 Configuration of digital inputs/outputs (X142)
Configuring
161