Bosch D9412GV4 Program Entry Manual page 92

92 en | Panel and Area Wide Parameters
NOTICE!
If a command within the Custom Function is passcode protected, ENTER PASSCODE appears
at the keypad. The user must enter a valid passcode before proceeding with the rest of the
Custom Function. If a passcode is not entered within 10 sec, the Custom Function times out
and the display returns to idle text.
NOTICE!
Skeds cannot execute Custom Functions that are passcode protected. The D720 LED keypad
does not support Custom Functions that are passcode protected.
Some functions cannot be entered directly because they are nested inside a higher-level
function. To automatically execute these functions, you must add the appropriate keystrokes.
–
–
To program multiple-area Arming or Disarming functions, use keystroke sequences including
COMMAND 50 (Move to Area) and COMMAND 1.
NOTICE!
Custom function cannot be used to change time (such as Daylight Saving Time). Use Skeds
S## Function Codes 13 and 14 to adjust for Daylight Saving Time (refer to S## Custom
Function prompt in Section 6.2 Schedules (Skeds), page 164.
Example 1
Execute the third function in a keypad menu function list:
–
–
NOTICE!
The custom functions in Example 1 are not compatible between keypad types.
Example 2
Instant master Arm (CMD 11):
–
–
F.01U.218.312 | 04 | 2012.03
access a Custom Function from the menu list. ENTER PASSCODE (or Enter Passcode +
[Enter] key on the D1260) appears when this function is passcode protected.
For example: The Change Display (COMMAND 49) function has three sub-functions:
Bright Display, Dim Display, and Date/Time Display.
– To turn up the display, enter: [A][4][9][E]
– To dim the display, enter: [A][4][9][D][E]
– To display time and date, enter: [A][4][9][B][E]
Custom Functions can perform several tasks at one time. For example:
– To toggle relays 7, 8, and 9 in one Custom Function enter: [A] [5] [4] [7] [E] [E] [8]
[E] [E] [9] [E] [E] [C]
– To add a temporary passcode, enter: [A] [5] [6] [3] [0] [E] [E] [9] [8] [7] [E] [E] [D]
[E] [1] [E] [1] [E] [1] [E] [1] [E] [1] [E] [1] [E] [1] [E] [1] [E] [C]
This adds user 30, passcode 987 with authority level 1 in all areas.
– To delete the passcode, enter: [A] [5] [3] [3] [0] [E] [E] [E] [C]
D1255: CDDE
D1260: C8C7C5
D1255: A11
D1260: A11
Program Entry Guide
D9412GV4/D7412GV4/D7212GV4
Bosch Security Systems, Inc.