Bosch D9412GV4 Program Entry Manual page 13

D9412GV4/D7412GV4/D7212GV4
99 [ENTER] [Next] Tools Menu [ENTER]
Programming
Phone Numbers [ENTER]
Phone Parameters [ENTER]
Enhanced Comm [ENTER]
IP Module Config [ENTER]
NOTICE!
To move
through the
Programming
menu and
submenus, press
the Next softkey.
To open a
menu or submenu,
press [ENTER].
To exit to the
previous level,
press the Exit
softkey.
To send saved
changes to the
Routing [ENTER]
control panel,
RPS Parameters [ENTER]
exit from
Programming
mode.
Area Parameters [ENTER]
Command Center [ENTER]
User Passcode [ENTER].............................................................................................. 126
Point Parameters [ENTER]
Disable Keypad Programming [ENT]........................................................................... 101
Bosch Security Systems, Inc.
D1260 Keypad Programming Menu
ENTER PASSCODE (Installer) [ENTER]
Program Entry Guide
Phone 1-4.................................................................. 17
Phone 1-4.................................................................. 19
Communications.................................................... 40
Select IP Path
B420 Module (1-2)
Module Parameters
Address Parameters
DNS Parameters
Encryption
Route Group 1-4....................................................... 30
RPS Passcode....................................................... 55
RPS Phone Number............................... 58
RPS IP Address..................................... 41
RPS IP Port........................................... 48
Area Number 1-32.....................................................
(1 - 8 for D7412GV4)(1 - 4 for D7212GV4)
CC Number 1-16...................................................... 80 and
PT NUM 1-247..........................................................
(1-75 for D7412GV4)(1-40 for D7212GV4)
Introduction | en
Path 1-4............................ 40
DHCP Enable.. 180
UPnP Enable.. 184
IP ADDRESS... 180
Subnet Mask.. 181
Default
Gateway............. 182
Port Number.. 184
Server
Address.............. 183
Module
Hostname.......... 186
AES Key Size.. 185
AES
Encryption Key... 185
F.01U.218.312 | 04 | 2012.03
13
Refer to
Page
40
61
81
146