Bosch D9412GV4 Program Entry Manual page 62

62 en | Panel and Area Wide Parameters
5.
When the keypad reads PARAMETER SAVED, your selection is configured.
6.
7.
8.
9.
When the keypad reads PARAMETER SAVED, your selection is configured.
D1260
1.
2.
3.
4.
5.
When the keypad reads Parameter Saved, your selection is configured.
6.
7.
8.
9.
When the keypad reads Parameter Saved, your selection is configured.
Area# Force Arm/Bypass Max
Default:
Selection:
Specify the maximum number of combined Controlled points that can be faulted or bypassed
when arming this area.
Refer to the prompts P## Force Arm Returnable and P## Bypass Returnable in Section P##
Force Arm Returnable, page 140 and Section P## Bypass Returnable, page 140 for returning a
point to the system when the point returns to normal or when the area is disarmed.
NOTICE!
Users can bypass more points than the number entered here during the disarmed state. It is
only when the user attempts to Bypass Arm an area (or areas) that this restriction is enforced.
Area# Delay Restorals
Default:
Selection:
F.01U.218.312 | 04 | 2012.03
Press the [PREV] or [NEXT] button to toggle between YES and NO, and then press [ENT]
when the desired configuration option shows.
When the keypad reads AREA STATUS, press [NEXT] to advance to the A# ACCOUNT
NUMBER option. The keypad shows the currently configured account number.
Press [ENT] to change the account number.
The [PREV] button acts as a [Backspace] key. The [COMMAND] key cycles though the
special account number characters (B, C, D, E, F); [NEXT] select the account number
character. Press [PREV] to delete the characters of the account number and then enter
the new account number.
Press [ENT] to save the changes.
Refer to Section 2.5.1 Keypad Programming Menu, page 12 to access Keypad Programming
and navigate to the Area Parameters option. Press [ENT].
The keypad reads Area Number 1 – 32 (1 - 8 for D7412GV4 and 1 - 4 for D7212GV4).
Enter the area number you wish to configure and press [Enter]. The current area status
shows (for example, Area 1 On: Yes).
Press the Edit softkey to change the area's status.
Press the Yes or No softkey, and then press the Save softkey to save the changes.
When the keypad reads Area Status, press the Account Number softkey. The keypad
shows the currently configured account number.
Press the Edit softkey to change the account number.
Use the softkeys and the number buttons on the keypad to enter the new account
number. The Backspace softkey allows you to erase characters. The Clear softkey allows
you to clear the entire account number. When entering a letter character, press the
letter's softkey to select it. The Previous and Next softkeys advance through the letter
characters (A, B, C, D, E, F).
Press the Save softkey to save the changes.
2
0 to 99
No
Yes or No
Program Entry Guide
D9412GV4/D7412GV4/D7212GV4
Bosch Security Systems, Inc.