Table of Contents
Advertisement
Radar-Assisted Event Enforcement Traffic Camera User Manual
5) Optional: Click Draw Lane Line to restore to the default drawing.
6) Select the area No., and click Draw Area to draw the area.
Note
Click the left button of the mouse to locate the vertexes of the area on the live view image,
and click the right button of the mouse to finish the drawing.
7) Select another area No. and draw the area according to the steps above.
8) Click OK.
9. Click Save.
4.2 Set Data Collection
You can set the vehicle data collection and analysis parameters.
Steps
1. Go to Configuration → Device Configuration → Application Mode → Trigger Mode.
2. Select Linked Lane Amount.
3. Click Data Collection.
Figure 4-2 Draw Lane Lines and Areas
16
Advertisement
Table of Contents
