HIKVISION iDS-TCD403-BI User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. iDS-TCD403-BI
  6. User manual

HIKVISION iDS-TCD403-BI User Manual

Network traffic camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Traffic Camera (for Traffic Flow
Camera)
User Manual

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION iDS-TCD403-BI

Summary of Contents for HIKVISION iDS-TCD403-BI

  • Page 1 Network Traffic Camera (for Traffic Flow Camera) User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 Network Traffic Camera (for Traffic Flow Camera) User Manual PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
  • Page 4 Network Traffic Camera (for Traffic Flow Camera) User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 Network Traffic Camera (for Traffic Flow Camera) User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could Caution result in equipment damage, data loss, performance degradation, or...
  • Page 6 Network Traffic Camera (for Traffic Flow Camera) User Manual Safety Instruction Regulatory Information This is a class A product and may cause radio interference in which case the user may be required to take adequate measures. Laws and Regulations Use of the product must be in strict compliance with the local laws and regulations. Please shut down the device in prohibited area.
  • Page 7 Network Traffic Camera (for Traffic Flow Camera) User Manual • DO NOT expose the device to extremely hot, cold, or humidity environments. For temperature and humidity requirements, see device specification. • No naked flame sources, such as lighted candles, should be placed on the equipment. •...

  • Page 8: Table Of Contents

    Network Traffic Camera (for Traffic Flow Camera) User Manual Contents Chapter 1 Activation and Login ....................1 1.1 Activation ..........................1 1.1.1 Default Information ...................... 1 1.1.2 Activate via SADP ......................1 1.1.3 Activate via Web Browser ..................... 2 1.2 Login ............................3 Chapter 2 Capture Configuration ....................
  • Page 9 Network Traffic Camera (for Traffic Flow Camera) User Manual 3.1.10 Enable Regional Exposure ..................13 3.1.11 Enable Wiper ......................13 3.2 Local Configuration ......................13 Chapter 4 Record and Capture ....................15 4.1 Set Storage Path ........................15 4.1.1 Set Storage Card ......................15 4.1.2 Set FTP ........................
  • Page 10 Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 8 Exception Alarm ....................... 36 Chapter 9 Safety Management ....................37 9.1 Manage User ........................37 9.2 Enable User Lock ........................37 9.3 Set HTTPS ..........................38 9.3.1 Create and Install Self-signed Certificate ..............38 9.3.2 Install Authorized Certificate ..................

  • Page 11: Chapter 1 Activation And Login

    • Get the SADP software from the supplied disk or the official website ( http:// www.hikvision.com/ ), and install it according to the prompts. • The device and the computer that runs the SADP tool should belong to the same network segment.

  • Page 12: Activate Via Web Browser

    Network Traffic Camera (for Traffic Flow Camera) User Manual 4. Click Activate to start activation. Figure 1-1 Activate via SADP Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same network segment as your computer by either modifying the IP address manually or checking Enable DHCP.

  • Page 13: Login

    Network Traffic Camera (for Traffic Flow Camera) User Manual 4. Click OK to complete activation. 5. Go to the network settings interface to modify IP address of the device. 1.2 Login You can log in to the device via web browser for further operations such as live view and local configuration.

  • Page 14: Chapter 2 Capture Configuration

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 2 Capture Configuration 2.1 Set Data Collection You can set the vehicle data collection and analysis parameters. Steps 1. Go to Configuration → Device Configuration → Application Mode → Trigger Mode . 2.
  • Page 15 Network Traffic Camera (for Traffic Flow Camera) User Manual One coil for each lane. Double Coil Two coils for each lane. 6. Enable POS information. 1) Check Enable POS Information. 2) Enter X-Coord. and Y-Coord. of the POS information overlaid on the live view image. 3) Check the POS information to overlay on the live view image.

  • Page 16: Set Capture Parameters

    Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 2-2 Draw Lane Lines and Virtual Coil Areas 9. Click Save. 2.2 Set Capture Parameters 2.2.1 Set Supplement Light Parameters Supplement light can enhance the image stabilization and adjust the brightness and color temperature.

  • Page 17: Set Capture Overlay

    Network Traffic Camera (for Traffic Flow Camera) User Manual 2. Set Brightness of the solid light. 3. Set the solid light output mode. - Check Enable Solid Light by Auto Brightness Detection when you want the solid light to be controlled by detecting the surroundings brightness automatically.

  • Page 18: Set Image Encoding Parameters

    Network Traffic Camera (for Traffic Flow Camera) User Manual When the overlaid number digits are smaller than the fixed digits, 0 will be overlaid before the overlaid number. E.g., the fixed digits for lane No. is 2. If the lane No. is 1, 01 will be overlaid on the picture.

  • Page 19: Set Construction Parameters

    Network Traffic Camera (for Traffic Flow Camera) User Manual 4. Click Save. 2.2.4 Set Construction Parameters Set construction parameters according to the actual installation when applying the video speed detection. Steps 1. Go to Configuration → Device Configuration → System → Construction Parameters . Figure 2-6 Set Construction Parameters 2.
  • Page 20 Network Traffic Camera (for Traffic Flow Camera) User Manual Steps 1. Click Picture. 2. Set the search conditions such as Lane No., Vehicle Type, etc. 3. Click Search. The searched pictures information will be displayed in the picture list. Note You can go to Configuration →...

  • Page 21: Chapter 3 Live View And Local Configuration

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 3 Live View and Local Configuration 3.1 Live View 3.1.1 Start/Stop Live View Click to start live view. Click to stop live view. 3.1.2 Select Image Display Mode Click to display the image in 4:3/16:9/self-adaptive display mode. 3.1.3 Select Stream Type Click to select the stream type.

  • Page 22: Start/Stop Two-Way Audio

    Network Traffic Camera (for Traffic Flow Camera) User Manual 3.1.6 Start/Stop Two-Way Audio The device supports two-way audio with terminals, such as computers. Before You Start The device is equipped with an audio input interface and audio output interface, which support connecting with the corresponding devices, such as microphones and loudspeakers.

  • Page 23: Enable Regional Exposure

    Network Traffic Camera (for Traffic Flow Camera) User Manual 3.1.10 Enable Regional Exposure Enable regional exposure to expose partial area of the live view image. Steps 1. Click 2. Drag the cursor downwards and rightwards to select an area in the live view image. The selected area can be exposed.
  • Page 24 Network Traffic Camera (for Traffic Flow Camera) User Manual Provides real-time audio and video streams. Live View Performance Real Time The video is real-time, but the video fluency may be affected. Balanced Balanced mode considers both the real time and fluency of the video. Fluent When the network condition is good, the video is fluent.

  • Page 25: Chapter 4 Record And Capture

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 4 Record and Capture 4.1 Set Storage Path 4.1.1 Set Storage Card If you want to store the files to the storage card, make sure you insert and format the storage card in advance.

  • Page 26: Set Listening Host

    Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 4-2 Set FTP 2. Enable the FTP server. 3. Optional: Check Upload Additional Information, and then the related information can be attached when uploading. 4. Set FTP parameters. 1) Enter Server Address and Port. 2) Enter User Name and Password, and confirm the password.

  • Page 27: Set Cloud Storage

    Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 4-3 Set Listening Host 2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm information. 3. Set Listening Host IP Address/Domain and Listening Host Port, and check Enable Picture Uploading Listening if you need to upload pictures.

  • Page 28: Set Quota

    Network Traffic Camera (for Traffic Flow Camera) User Manual 2) If you select V2.0, enter accessKey and secretKey of the resource pool. Note If you select V1.0, enter User Name and Password. 3) Enter the ID according to the storage area No. of the server. 5.
  • Page 29 Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 4-5 Set Record Schedule 2. Optional: Check Enable Overwritten Recording. When the storage is full, the earliest videos will be overwritten. 3. Check Enable Record Schedule. 4. Click Edit to edit the record schedule. 1) Select Customize.

  • Page 30: Chapter 5 Encoding And Display

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 5 Encoding and Display 5.1 Set Video Encoding Parameters Set video encoding parameters to adjust the live view and recording effect. • When the network signal is good and the speed is fast, you can set high resolution and bitrate to raise the image quality.

  • Page 31: Set Image Parameters

    Network Traffic Camera (for Traffic Flow Camera) User Manual Image Quality When bitrate type is variable, 6 levels of image quality are selectable. The higher the image quality is, the higher requirements of the network bandwidth. Profile When you select H.264 or H.265 as video encoding, you can set the profile. Selectable profiles vary according to device models.
  • Page 32 Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 5-2 Set Video Image Parameters 2. Adjust the parameters. Saturation It refers to the colorfulness of the image color. Sharpness It refers to the edge contrast of the image. White Balance It is the white rendition function of the device used to adjust the color temperature according to the environment.

  • Page 33: Set Icr

    Network Traffic Camera (for Traffic Flow Camera) User Manual The higher the gamma correction value is, the stronger the correction strength is. Brightness It refers to the max. brightness of the image. Contrast It refers to the contrast of the image. Set it to adjust the levels and permeability of the image.

  • Page 34: Set Roi

    Network Traffic Camera (for Traffic Flow Camera) User Manual Manual Switch Select Day/Night Mode to switch to the day or night manually. Scheduled Mode Set day/night mode, start time, and end time to switch to ICR mode only during the set time period. No Switch Disable the ICR mode.

  • Page 35: Set Osd

    Network Traffic Camera (for Traffic Flow Camera) User Manual 5) Select the fixed area that needs to be adjusted and drag the mouse to adjust its position. 6) Click Stop Drawing. 4. Select Area No. and ROI Level and enter Area Name. Note The higher the ROI level is, the clearer the image of the detected area is.
  • Page 36 Network Traffic Camera (for Traffic Flow Camera) User Manual 4. Optional: Check the display item(s) and enter information in the text field(s). 5. Drag the red frames on the live view image to adjust the OSD positions. 6. Click Save. Result The set OSD will be displayed in live view image and recorded videos.

  • Page 37: Chapter 6 Network Configuration

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 6 Network Configuration 6.1 Set IP Address IP address must be properly configured before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be configured simultaneously without conflicting to each other.

  • Page 38: Connect To Isup Platform

    Network Traffic Camera (for Traffic Flow Camera) User Manual You can set the device IPv4 parameters manually. Enter IPv4 Address, IPv4 Subnet Mask, and IPv4 Default Gateway. IPv6 Three IPv6 modes are available. Route Advertisement The IPv6 address is generated by combining the route advertisement and the device Mac address.

  • Page 39: Set Ddns

    Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 6-2 Connect to ISUP Platform 2. Check Enable. 3. Select Protocol Version. 4. Enter Platform IP Address, Platform Port, and Camera No. Note The camera No. should be the same with the added one on the ISUP platform. 5.

  • Page 40: Set Ieee 802.1X

    Network Traffic Camera (for Traffic Flow Camera) User Manual Figure 6-3 Set DDNS 2. Check Enable DDNS. 3. Enter the server address and other information. 4. Click Save. 5. Access the device. By Browsers Enter the domain name in the browser address bar to access the device.

  • Page 41: Set Snmp

    Network Traffic Camera (for Traffic Flow Camera) User Manual If you use EAP-MD5, the authentication server must be configured. Register a user name and password for 802.1X in the server in advance. Enter the user name and password for authentication. EAPOL Version The EAPOL version must be identical with that of the router or the switch.

  • Page 42: Set Port

    Network Traffic Camera (for Traffic Flow Camera) User Manual Note The parameters should be consistent with those on the image and video library platform. 4. Set other parameters. Heartbeat Cycle The connection time between the device and the image and video library platform. Max.
  • Page 43 Network Traffic Camera (for Traffic Flow Camera) User Manual Note • After editing the port, access to the device via new port. • Reboot the device to take the new settings into effect. • The supported ports vary with different models. The actual device prevails.

  • Page 44: Chapter 7 Serial Port Configuration

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 7 Serial Port Configuration 7.1 Set RS-485 Set RS-485 parameters if the device needs to be connected to other peripheral devices controlled by RS-485 serial port. Before You Start The corresponding device has been connected via the RS-485 serial port. Steps 1.
  • Page 45 Network Traffic Camera (for Traffic Flow Camera) User Manual 3. Set Baud Rate, Data Bit, Stop Bit, etc. Note The parameters should be same with those of the connected device. 4. Select Working Mode. Console Select it when you need to debug the device via RS-232 serial port. Transparent Channel Select it, and the network command can be transmitted to RS-232 control command via the RS-232 serial port.

  • Page 46: Chapter 8 Exception Alarm

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 8 Exception Alarm Set exception alarm when the network is disconnected, the IP address is conflicted, etc. Steps Note The supported exception types vary with different models. The actual device prevails. 1.

  • Page 47: Chapter 9 Safety Management

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 9 Safety Management 9.1 Manage User The administrator can add, modify, or delete other accounts, and grant different permissions to different user levels. Steps 1. Go to Configuration → Device Configuration → User Management . 2.

  • Page 48: Set Https

    Network Traffic Camera (for Traffic Flow Camera) User Manual 3. Click Save. Result When the times you entered incorrect passwords have reached the limit, the current IP address will be locked automatically. 9.3 Set HTTPS 9.3.1 Create and Install Self-signed Certificate HTTPS is a network protocol that enables encrypted transmission and identity authentication, which improves the security of remote access.

  • Page 49: Set Ssh

    Network Traffic Camera (for Traffic Flow Camera) User Manual 9.4 Set SSH To raise network security, disable SSH service. The configuration is only used to debug the device for the professionals. Steps 1. Go to Configuration → Device Configuration → System → Service . 2.

  • Page 50: Chapter 10 Maintenance

    Network Traffic Camera (for Traffic Flow Camera) User Manual Chapter 10 Maintenance 10.1 View Device Information Basic Information and Algorithms Library Version Go to Configuration → Device Configuration → System → Device Information to view the basic information and algorithms library version of the device. You can edit Device Name and Device No.

  • Page 51: Upgrade

    Network Traffic Camera (for Traffic Flow Camera) User Manual The matched log files will be displayed on the log list. 4. Optional: Click Save Log to save the log files to your computer. 10.3 Upgrade Upgrade the system when you need to update the device version. Before You Start Prepare the upgrade file.

  • Page 52: Synchronize Time

    Network Traffic Camera (for Traffic Flow Camera) User Manual 3. Click OK. 10.6 Synchronize Time Synchronize the device time when it is inconsistent with the actual time. Steps 1. Go to Configuration → Device Configuration → System → Time Settings . 2.

  • Page 53: Debug

    Network Traffic Camera (for Traffic Flow Camera) User Manual 4. Click Save. 10.8 Debug Note The debug configurations below are only provided to debug the device by the professionals. 10.8.1 Enable Information Overlay You can overlay the algorithm POS information and positioning frames on the captured pictures or playback images.

  • Page 54: Export Parameters

    Network Traffic Camera (for Traffic Flow Camera) User Manual 3. Click Save. 10.9 Export Parameters You can export the parameters of one device, and import them to another device to set the two devices with the same parameters. Steps 1. Go to Configuration → Device Configuration → System Maintenance → Export Parameters . 2.

  • Page 55: Export Debug File

    Network Traffic Camera (for Traffic Flow Camera) User Manual 10.11 Export Debug File The technicians can export the debug file to troubleshoot and maintain the device. Steps 1. Go to Configuration → Device Configuration → System Maintenance → Export Debug File . 2.

  • Page 56: Appendix A. Communication Matrix And Device Command

    Network Traffic Camera (for Traffic Flow Camera) User Manual Appendix A. Communication Matrix and Device Command Scan the QR code below to get the communication matrix of the device. Scan the QR code below to get the device command.
  • Page 57 UD23096B...

This manual is also suitable for:

Ids-tcd402-brIds-tcs402-b-cs

Table of Contents