Set Quota - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
2. Check Enable.
3. Select Version.
4. Set the server parameters.
1) Enter Server IP Address and Port No.
2) If you select V2.0, enter accessKey and secretKey of the resource pool.
Note
If you select V1.0, enter User Name and Password.
3) Enter the ID according to the storage area No. of the server.
5. Click Save.

6.2 Set Quota

Set the video and picture ratio in the storage.
Before You Start
Install the storage card.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Storage Management.
2. Set Picture Quota and Record Quota according to the actual needs.
Note
The percentage sum of the picture and record quota ratio should be 100%.
3. Click Save.
What to do next
Format the storage card after the settings.
Figure 6-4 Set Cloud Storage
37