Set Cloud Storage - HIKVISION iDS-TCS907-CIR User Manual

Radar-Assisted Event Enforcement Traffic Camera User Manual
Steps
1. Go to Configuration → Device Configuration → System → Network Interface Parameters.
2. Set ANPR IP Address/Domain and ANPR Port if you need to upload the alarm information.
3. Set Listening Host IP Address/Domain and Listening Host Port, and check Enable Picture
Uploading Listening if you need to upload pictures.
Note
ANPR and listening conflict with each other. When you enable listening host, pictures will be
uploaded via listening host in priority. When you disable listening and have set ANPR IP address
and port, pictures will be uploaded via ANPR protocol.
4. Click Save.

6.1.4 Set Cloud Storage

Cloud storage is a kind of network storage. It can be used as the extended storage to save the
captured pictures.
Before You Start
● Arrange the cloud storage server.
● You have enabled level 1 arm in Real-Time Status and Traffic Flow Statistics.
Note
The real-time status and traffic flow statistics should be used with dedicated platform.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → Cloud Storage.
Figure 6-3 Set Listening Host
36